US versionOther versions: France (in French) · Belgium (in French) · Switzerland (in French) · England
Small Appliances
Robot vacuum not charging: what to check
Start at the dock. A charging failure does not automatically mean a dead battery.
The answer in 2 lines. Check whether the dock receives power and whether the robot is positioned correctly. With the dock unplugged and the robot switched off as instructed, inspect accessible charging contacts and clean them only by the approved method. Then follow the manual’s docking and restart procedure. Indicator lights and switch positions vary, so do not diagnose a battery failure from a dark light alone. Stop charging if the battery is swollen, unusually hot or smells burned. Smoke or fire means get out and call 911.
Start with these checks
- Check power without opening anything. Inspect the dock’s accessible cord and connections. If the outlet and surrounding area are dry and undamaged, test the outlet with a working lamp.
- Inspect the charging surfaces. Unplug the dock and turn off the robot as directed. If the manual permits, wipe accessible contacts with a soft, dry cloth. Do not scrape them or spray cleaner into the dock.
- Dock it according to the manual. Check placement, alignment and any required power-switch setting. Read the charging indication described for your exact model.
Stop: danger
- Swelling, unusual heat, leakage or odor: stop using and charging the robot. Do not pry open the battery pack or carry a hot device through the home. Review the U.S. Fire Administration battery safety guidance for warning signs and charging precautions.
- Smoke or fire: leave the area, get outside and call 911. Do not delay evacuation to save the vacuum.
- Damaged dock or wet electrical parts: stop testing. Arrange qualified service rather than opening the power supply.
Separate a docking problem from a charging fault
| What you observe | What to check next |
|---|---|
| The outlet does not power a lamp | Investigate the outlet or circuit before blaming the robot. |
| The robot misses the dock | Check the manual’s placement, approach-space and sensor-cleaning instructions. |
| Charging starts only after repositioning | Check alignment and accessible contacts; persistent problems need assessment. |
| A charging error appears | Record the exact message and use the model’s troubleshooting instructions. |
| It docks but still will not charge | The battery, dock or charging electronics may need service; observation alone does not identify the failed part. |
Photograph the robot’s model label and the dock’s label before seeking help. Note whether the issue began after moving the dock, cleaning, storage or a power interruption.
What not to do
- Using a charger or dock because the connector appears to fit.
- Bridging charging contacts with metal, bending them or bypassing a safety switch.
- Opening the dock, puncturing a battery or attempting to rebuild its cells.
- Repeating resets or charging attempts when the device shows abnormal heat or damage.
- Ordering a battery before checking the exact model and replacement instructions.
Placement, restarting and battery replacement
Use the surface and clearance specified for your dock. Check whether furniture, loose cords or a shifted base prevents the robot from sitting correctly. There is no universal clearance measurement suitable for every robot.
If the instructions recommend a restart, use that procedure. A factory reset may erase settings or maps, so read its consequences first. Do not install unofficial software or assume an update will repair a physical charging fault.
Reduced runtime can justify checking battery condition, but failure to charge does not prove battery wear. Ask for an assessment when the basic checks fail. Replace a battery yourself only if the instructions identify it as user-serviceable, and use the specified replacement. Stop if removal requires force or exposes damaged wiring.
Recalls, warranty and safe disposal in the U.S.
Use CPSC’s search tool: select “Recalls,” enter the exact model and compare identifying details with any notice. Follow a matching recall’s instructions before further charging or repairs.
Gather the receipt, error message and troubleshooting notes. Read the warranty’s battery and charging-system provisions before requesting service. The FTC warranty guide explains written coverage and state-dependent implied warranties; coverage cannot be promised from the appliance’s age alone.
For disposal, consult EPA’s consumer battery guidance. Keep lithium-ion batteries and devices containing them out of trash and curbside recycling. Contact your local household hazardous-waste program about acceptance; disclose damage before transporting a suspect battery.
Good to know
- A dock light may turn off during normal operation. Interpret lights using the exact manual.
- Do not assume the robot must be switched on or off to charge: the required setting depends on its design.
- A repair estimate should identify whether the proposed work concerns the battery, dock or robot, rather than simply promising to replace parts until it works.
In Columbus, Taylor’s robot stops charging after the dock is moved. Taylor checks outlet power, unplugs the dock and follows the manual’s contact-cleaning instructions. Correct placement restores charging. If it had not, Taylor would have recorded the error and requested an assessment instead of buying a battery on a guess.
A made-up story, for illustration.
Read more guides
Bobby publishes free practical guides written for the United States: American laws, numbers and organizations. In the United States, Bobby answers your questions; it does not put you in touch with professionals.
All guides: United StatesSources, verification, confidence
Verified on November 7, 2026, for the United States. Confidence: high for battery safety, disposal and general warranty guidance; medium for troubleshooting because contact cleaning, indicator behavior, dock clearance and restart procedures are model-specific. These checks do not establish which component has failed.