England versionOther versions: France (in French) · Belgium (in French) · Switzerland (in French) · United States
Small appliances
Robot vacuum not charging: what to check
Check the charging setup before blaming the battery.
The answer in 2 lines. Check the dock's power connection and your model's charging instructions. With the dock unplugged and the robot switched off, inspect accessible charging contacts and clean them only as the instructions permit. Reposition the robot correctly and observe its charging indication. A charging failure does not prove the battery is worn out: the dock, power supply or internal charging system may need assessment. Do not open mains-powered equipment or try an improvised charger.
Start with the accessible checks
- Inspect the plug, lead and dock for damage. If everything looks sound and the socket is dry and undamaged, check the socket with a known-working lamp.
- Unplug the dock and switch off the robot before inspecting accessible contacts. If the instructions allow it, wipe them gently with a clean, dry cloth; do not scrape them.
- Reconnect the dock, position the robot as instructed and check its status message. Look up the exact light pattern or error wording in the supplied instructions.
Stop: danger
- Swollen, leaking or unusually hot battery: stop charging. Disconnect the supply only if safe. Do not remove the casing, press on the battery or attempt another charge.
- Smoke or fire: leave immediately, stay out and call 999. Do not carry a smoking robot through your home. The London Fire Brigade emergency guidance explains when to call and what information to give.
- Wet or damaged equipment: do not reconnect it to see whether it still works. Arrange an assessment.
Separate docking trouble from charging trouble
Can the robot physically reach its dock? If not, check for objects blocking the approach, a dock that has shifted or a cable trapped underneath it. Use the surface and clearances specified for your model; there is no universal distance that suits every robot.
If it reaches the dock but does not charge, focus on seating, power and the displayed error. If it charges when placed correctly by hand but cannot return unaided, report that distinction when seeking help. It can make the fault easier to identify without opening anything.
What you can safely try
| Observation | Next step |
|---|---|
| No charging indication | Check connections and the normal indicator behaviour in the instructions. A dark light is not always proof of failure. |
| Robot sits unevenly | Remove visible obstructions and reseat it without forcing the contacts. |
| Controls seem unresponsive | Follow the documented restart procedure. Avoid a factory reset unless you understand what settings it removes. |
| Charging stops with an error | Record the exact message and follow its model-specific troubleshooting instructions. |
| Problem persists | Stop repeated attempts and seek assessment of the robot, dock and power supply. |
What not to do
- Using water, household spray, abrasive pads or metal tools on charging contacts.
- Opening the charging dock, bypassing a protection device or testing another power supply merely because its connector fits.
- Ordering a replacement battery before confirming the diagnosis and approved part.
When the battery may need replacing
A shorter cleaning run can be useful evidence, but it does not establish the cause of a charging failure. Tell the repairer whether the change was gradual or sudden, whether the robot charges intermittently and whether anything was spilled nearby.
Only replace a battery yourself if the instructions expressly permit it and identify the correct procedure. Otherwise use a suitably qualified repairer. For charging precautions, consult the London Fire Brigade battery guidance; follow its warning to stop charging a swollen battery and avoid tampering.
Repair, consumer rights and disposal
Keep purchase evidence, photographs of the label and a record of the checks performed. If you suspect a fault, contact the seller before authorising a paid repair. Use the Citizens Advice faulty-goods guide for England to work through your circumstances. Battery wear and a defective battery are not automatically the same issue.
Do not put the robot or battery in household rubbish. Read the official electrical-waste and battery guidance for collection routes. Ask the receiving service how to handle a damaged battery before transporting it; do not force out a built-in pack.
Good to know
- Search the exact model in the official safety database. Check the identifying details and follow any matching recall instructions.
- Read Electrical Safety First's vacuum advice for approved battery and charger precautions.
- This guide covers England. Consumer advice routes and waste arrangements can differ elsewhere in the UK.
Illustrative example: in Bristol, Daniel finds his robot sitting crookedly on its dock. He disconnects the dock, checks the accessible contacts as instructed and removes an obstruction underneath it. After reseating the robot, he checks the normal charging indication. If charging had failed again, he would have recorded the message and sought an assessment.
A made-up story, for illustration.
Read more guides
Bobby publishes free practical guides written for England: English laws, numbers and organizations. In England, Bobby answers your questions; it does not put you in touch with professionals.
All guides: EnglandSources, verification, confidence
Verified on 7 November 2026, for England. Confidence: high for battery warnings, fire response, consumer advice and separate waste collection; medium for troubleshooting, which must follow the particular model's instructions. No universal charging time, dock clearance or battery lifespan is confirmed. Examples are illustrative.