US versionOther versions: France (in French) · Belgium (in French) · Switzerland (in French) · England
Ovens, Cooktops and Microwaves
Induction cooktop showing an error: what to check
Record the display before trying to clear it.
The answer in 2 lines. Take a photo of the display and check your exact model's instructions. Start with external checks: suitable cookware, correct pan position, a clear control area and any control lock. Let an overheated appliance cool and follow its ventilation requirements. Reset power only as the instructions direct. Stop using a cracked cooktop or one with smoke, a burning smell or repeated breaker trips. Persistent faults need qualified service, not repeated resets or cabinet removal.
Start with these checks
- Record the complete display, affected cooking zone and what happened immediately before the problem. Note whether the appliance was cold, cooking or recovering from a spill.
- Turn the controls off. Once safe to touch, remove objects and gently clean and dry the control area according to the supplied instructions.
- Check the cookware and control-lock instructions for your model. Do not use another appliance's button sequence or reset time.
Stop: danger
- Cracked or broken glass: stop using the cooktop. Disconnect its power at the identified breaker if you can safely do so, and arrange qualified service.
- Burning smell, smoke or repeated breaker trips: stop using it. Do not keep restoring power to see whether the fault clears.
- Active fire or unsafe smoke: leave the home and call 911 from outside. Never put water on burning cooking oil.
Separate a cookware problem from an appliance problem
Induction needs a suitable magnetic cooking base. When everything is cool, check the pan with a magnet and compare its base size with the cooking-zone requirements. Center it as directed. A pan that works on one zone may be too small for another.
The Department of Energy's induction overview explains the basic flat-bottom and magnet checks. Use those checks before replacing cookware.
Try a pan already known to work on your appliance, following the normal cooking instructions and staying present. If that resolves the issue, the original pan or its positioning needs attention. If the same zone still fails with suitable cookware, report that comparison when requesting service. It helps describe the problem without claiming to diagnose an internal part.
What not to do
- Treating an online code explanation as valid for every induction cooktop.
- Repeatedly cycling the breaker to erase a recurring warning.
- Removing the cooktop, opening its cabinet or adjusting wiring.
- Resting hot cookware on the controls or leaving utensils across touch buttons.
- Moving an installed appliance to reach a label or fan.
Read the instructions before resetting
Find the model information in your purchase records or supplied paperwork. Read the sections covering displays, troubleshooting, control locks and ventilation. A hot-surface indicator or lock symbol may describe normal operating status rather than a failure.
If the instructions identify an obstruction or overheating condition, follow their steps and let the appliance cool. Remove only accessible obstructions; do not dismantle cabinetry or reach into the appliance. Installation clearances and cooling arrangements vary.
If a power reset is recommended, use the specified procedure and duration. There is no reset time that is safe to prescribe for every model. If the instructions call for service, or the warning returns, stop troubleshooting.
Prepare a service note with the model, exact display, photos, affected zones and external checks already completed. Ask for a written estimate before authorizing repairs.
Check recalls and your consumer rights
Search the CPSC recall database by product identity. Compare the full model information and other identifiers with the notice. If yours matches, follow the stated stop-use and remedy instructions rather than arranging an unrelated repair.
For warranty service, gather your receipt and written coverage. Ask whether diagnostic visits, parts, labor and access work are included. Do not assume a broken glass surface is covered: the warranty terms and cause of damage matter.
The FTC's warranty guide explains written and implied warranties. Read it to identify the coverage and records relevant to your claim. State rights differ; choose your state in the consumer protection directory to find official complaint instructions.
Good to know
- Keep the cooktop clear when it is not in use. Lift heavy cookware carefully and follow the surface-cleaning instructions.
- For an appliance supplied with a rental, send the landlord a written description and photos before arranging nonemergency repairs. Repair responsibilities depend on the lease and local law.
- Use the Texas State Fire Marshal's cooking-safety guidance to review pan-fire precautions: keep a lid available, never use water on a grease fire and leave if you cannot act safely.
During dinner preparation, Avery's induction cooktop begins beeping after a spill. Avery turns it off, photographs the display and waits until cleaning is safe. The instructions identify an obstructed control area. After cleaning and following the stated recovery steps, normal operation resumes. Avery would stop and request service if the warning returned.
A made-up story, for illustration.
Read more guides
Bobby publishes free practical guides written for the United States: American laws, numbers and organizations. In the United States, Bobby answers your questions; it does not put you in touch with professionals.
All guides: United StatesSources, verification, confidence
Verified on November 7, 2026, for the United States. Confidence: high for basic induction compatibility, recall checks and consumer-rights resources; medium for troubleshooting, which is model-specific. Exact codes, reset durations and internal faults cannot be established without the appliance's instructions and, where necessary, qualified diagnosis.