All guides

US versionOther versions: France (in French) · Belgium (in French) · Switzerland (in French) · England

Air Conditioning and Heat Pumps

SEER, HSPF, and COP: how to read heat pump efficiency ratings

Efficiency ratings tell you how much energy your heat pump uses to keep your home comfortable.

The answer in 2 lines. When shopping for a heat pump or air conditioner in the US, manufacturers use ratings like SEER2 (Seasonal Energy Efficiency Ratio) for cooling, HSPF2 (Heating Seasonal Performance Factor) for heating, and COP (Coefficient of Performance) for instantaneous efficiency. Higher numbers indicate greater energy efficiency, which translates into lower utility bills and can help you qualify for state or utility rebates. The federal 25C tax credit ended for equipment placed in service after December 31, 2025.

The 3 first steps

  1. Look for SEER2 and HSPF2 ratings on the EnergyGuide label or contractor specification sheet.
  2. Compare models of identical capacity (measured in BTUs or tons) under equivalent testing standards.
  3. Ask your contractor for AHRI (Air-Conditioning, Heating, and Refrigeration Institute) matching certificates to verify performance.

Understanding efficiency acronyms

RatingWhat it measuresReading example
COPRatio of heat produced to electricity consumed at a specific momentCOP 3: 3 units of heat for 1 unit of electricity
HSPF2Seasonal heating efficiency across an entire winterHigher number = lower winter heating bills
SEER2Seasonal cooling efficiency across an entire summerHigher number = lower summer cooling bills

Why your real-world efficiency may vary

  • Ratings are calculated under controlled laboratory test conditions; your local climate and home insulation affect actual performance.
  • In freezing outdoor temperatures, heating efficiency decreases compared to mild spring weather.
  • Improper sizing, dirty coils, or restricted airflow will lower your system's actual seasonal efficiency.

What not to do

  • Comparing heating ratings (HSPF2) directly against cooling ratings (SEER2).
  • Relying solely on peak COP advertising claims without reviewing seasonal performance data.
  • Overlooking noise levels (measured in decibels) for outdoor compressor units.

Good to know

  • State and utility rebate programs often set minimum SEER2 and HSPF2 thresholds. The federal 25C tax credit, which also had thresholds, no longer applies to equipment installed in 2026. Check the current program rules with your installer.

In Chicago, David reviews two heat pump proposals. Contractor A highlights a high cooling SEER2 rating, while Contractor B provides an AHRI certificate showing superior HSPF2 performance for cold winter heating. Since David's primary goal is winter warmth, he selects the model with the higher heating performance.

A made-up story, for illustration.

Official resources

  • Energy Star: find certified models and efficiency criteria at Energy Star.
  • AHRI Directory: verify certified equipment ratings and performance matches at AHRI Directory.
  • Department of Energy: review appliance efficiency standards at U.S. Department of Energy.
Bobby

Read more guides

Bobby publishes free practical guides written for the United States: American laws, numbers and organizations. In the United States, Bobby answers your questions; it does not put you in touch with professionals.

All guides: United States

Sources, verification, confidence

Verified on November 7, 2026, for the United States. Confidence: high for definitions of SEER2, HSPF2, and COP established by federal testing procedures; medium for specific efficiency thresholds, which update periodically.

Related guides

Also worth reading