All guides

England versionOther versions: France (in French) · Belgium (in French) · Switzerland (in French) · United States

Air conditioning and heat pumps

Heat pump COP and SCOP: how to compare efficiency

A higher efficiency figure is useful only when you know what it measures.

The answer in 2 lines. COP compares useful heating output with electricity input at specified operating conditions. SCOP describes performance over a standard heating season, making it more useful for comparing heating equipment under matching conditions. EER and SEER concern cooling. None guarantees your household's electricity bill. For a home in England, ask for a design based on its heat loss, radiators or underfloor heating, hot-water needs and local weather, plus a written explanation of the predicted electricity use.

The first steps

  1. Ask for the exact model's technical data and identify whether the quoted figure is COP, SCOP or a whole-system estimate.
  2. For an air-to-water heat pump, check the heating-water flow temperature and climate conditions attached to the rating.
  3. Ask each installer for the same information: heat-loss assessment, proposed emitters, expected annual electricity use and the assumptions behind running costs.

Stop: danger

  • Before accepting a quote: if an efficiency or savings claim has no stated conditions, ask for the evidence and assumptions in writing.
  • Before changing settings: do not lower stored hot-water temperatures or disable hygiene programmes to chase an efficiency figure. Ask the installer to distinguish space-heating settings from hot-water safety controls.

What the abbreviations mean

TermMeaningHow to use it
COPCoefficient of performance: useful heating output divided by electricity input at specified conditions.Check the test temperatures before comparing.
SCOPSeasonal coefficient of performance: a standardised heating-season efficiency calculation.Compare ratings using matching climate and heating-temperature assumptions.
EEREnergy efficiency ratio: cooling output divided by power input at specified conditions.Use for a comparable cooling test point.
SEERSeasonal energy efficiency ratio: performance representative of a cooling season.Compare seasonal cooling performance under the same rating system.

These are ratios, not the appliance's heating capacity. Capacity tells you how much heat it can deliver; efficiency describes the relationship between output and electricity input.

Why flow temperature matters

The temperature of water supplied to radiators or underfloor heating affects efficiency. A system that can heat the home with cooler water generally gives the heat pump an easier job. The right design still has to keep rooms comfortable during cold weather.

Official UK technical criteria use different water-temperature conditions, including 35°C and 55°C. These are rating conditions, not instructions to set every home to either temperature. Ask which figure matches your proposed design and what radiator or pipework changes it needs.

See the government's technical definitions: read the performance-metric explanations to understand why temperature and climate must accompany a seasonal figure. This is technical background, not a household product recommendation.

What not to do

  • Comparing one model's COP with another model's SCOP.
  • Assuming the highest advertised rating applies to your home's radiators and hot-water demand.
  • Treating a seasonal equipment rating as a guaranteed measured result for the complete installation.
  • Choosing on efficiency alone without checking heating capacity, outdoor noise, installation scope and maintenance requirements.

Ask what the estimate includes

A product rating and a whole-house prediction answer different questions. Ask whether the predicted electricity covers space heating, domestic hot water, circulation pumps, controls and any backup electric heater. Check whether the quoted seasonal result is calculated or measured.

Request an explanation of heat loss, local weather assumptions and the proposed operating schedule. A well-performing product can disappoint if the installation or controls are unsuitable. Conversely, comparing household bills without allowing for different homes and temperatures tells you little about the equipment.

Keep the design and commissioning information. It gives you a reference if comfort or consumption later differs substantially from the prediction.

Turn efficiency into a useful cost discussion

Ask the installer to show expected electricity consumption and the tariff used to estimate cost. Make sure any comparison with your present heating accounts for hot water and standing charges where relevant. Use your own current tariff rather than treating an advertised saving as universal.

Read Citizens Advice's England heat pump guidance, especially the section on energy bills, to identify the household factors that affect costs. Before signing, use the government's consumer buying guide to check the quotation, claims and contractual protections.

Good to know

  • The physics and efficiency terms apply across the UK, but grants, planning and consumer advice routes can differ between England, Wales, Scotland and Northern Ireland.
  • For an initial suitability check, open GOV.UK's heat pump checker and answer its questions about your property. It does not replace a design survey.
  • No current national average efficiency is used here: a product comparison should rely on matching test conditions and a home-specific design.

Illustrative example: Aisha receives competing quotations. One highlights a COP without test conditions; the other supplies seasonal data and explains the proposed radiator changes. She asks both installers for seasonal performance at the design flow temperature and comparable electricity estimates before deciding.

A made-up story, for illustration.

Bobby

Read more guides

Bobby publishes free practical guides written for England: English laws, numbers and organizations. In England, Bobby answers your questions; it does not put you in touch with professionals.

All guides: England

Sources, verification, confidence

Verified on 7 November 2026, for England. Confidence: high for the efficiency definitions and the importance of matching conditions; medium for predicted household consumption, which depends on design, use and weather. The 35°C and 55°C figures are technical rating conditions, not national performance averages. No guaranteed saving or grant threshold is asserted.

Related guides

Also worth reading