All guides

US versionOther versions: France (in French) · Belgium (in French) · Switzerland (in French) · England

Air Conditioning and Heat Pumps

Ducted heat pump vs. ductless mini-split: what's the difference?

Choosing a heat pump means looking at how your home is currently heated.

The answer in 2 lines. An air-source ductless mini-split heats and cools by blowing air directly through indoor wall-mounted units, acting as a flexible zoning system. A ducted heat pump connects to central ductwork to heat or cool the whole house, and air-to-water heat pumps can supply radiators or radiant floors. Choosing the right system depends on whether you have existing ducts, require cooling, and which state or utility rebates apply. Note: the federal 25C tax credit ended for heat pumps placed in service after December 31, 2025.

The 3 first steps

  1. Inspect your current setup: do you have existing air ducts, baseboard heaters, or a central boiler?
  2. Determine your cooling needs: do you want air conditioning in every room?
  3. Check current incentives: look up state and utility rebates (DSIRE, your state energy office) before getting contractor quotes.

Comparison of heat pump types

FeatureDuctless Mini-SplitDucted Air-Source Heat Pump
DeliveryWall or ceiling cassettes blowing airCentral vents and ductwork
Summer coolingExcellent (zoned control)Whole-house central cooling
ReplacesBaseboard heat, window AC unitsOld furnace or central AC
Incentives in 2026Federal 25C credit ended after 2025; check state and utility rebatesFederal 25C credit ended after 2025; check state and utility rebates
Typical Cost RangeVaries by number of zonesVaries by home size and ductwork

Key questions to ask yourself

  • Is your home properly insulated? Heat pumps perform best in tightly sealed, well-insulated homes.
  • Are your existing ducts clean and airtight, or do you need duct sealing?
  • Where will the outdoor compressor be placed to comply with local noise ordinances and HOA rules?

What not to do

  • Signing a contract after aggressive door-to-door sales or cold calls without checking contractor licensing.
  • Choosing equipment capacity without a formal Manual J load calculation for your home.
  • Skipping required annual maintenance, which voids warranties and reduces efficiency.

Good to know

  • Modern cold-climate heat pumps extract heat from outdoor air even when temperatures drop well below freezing, though backup heat may be needed in extreme climates.

In Denver, Sarah has an older home with electric baseboard heaters and no ductwork. A contractor recommends a multi-zone ductless mini-split system. Her neighbor down the street, who has existing central air ducts, opts for a ducted heat pump replacement. Both check state and utility rebates before signing, since the federal 25C credit no longer covers systems installed in 2026.

A made-up story, for illustration.

Federal and state resources

  • Energy Star: check certified heat pump models at Energy Star.
  • Database of State Incentives for Renewables & Efficiency (DSIRE): look up local utility rebates and state clean energy incentives at DSIRE.
  • Department of Energy: learn about home energy upgrades and savings at U.S. Department of Energy.
Bobby

Read more guides

Bobby publishes free practical guides written for the United States: American laws, numbers and organizations. In the United States, Bobby answers your questions; it does not put you in touch with professionals.

All guides: United States

Sources, verification, confidence

Verified on November 7, 2026, for the United States. Confidence: high for heat pump operating principles and the end of the federal 25C credit for equipment placed in service after December 31, 2025 (IRS); medium for exact equipment pricing, which depends heavily on regional labor rates and home specifications.

Related guides

Also worth reading