All guides

England versionOther versions: France (in French) · Belgium (in French) · Switzerland (in French) · United States

Air conditioning and heat pumps

Heat pump not working in winter: what should you do?

A pause in heating is not always a breakdown. Check the display before changing anything.

The answer in 2 lines. An air source heat pump can briefly interrupt heating while it defrosts in cold weather. Check the operating instructions and display before assuming it has failed. Look at the heating mode, schedule and room temperature setting, then inspect the outdoor area from a safe position. Persistent loss of heat, heavy ice that does not clear or a fault message needs the installer or a qualified heat pump engineer. If you rent in England, report the loss of heating to your landlord promptly and confirm it in writing.

The first steps

  1. Photograph any fault message before changing settings. Check the user instructions for the meaning of the message and any permitted user action.
  2. Check that heating is enabled, the schedule calls for heat and the room temperature setting is appropriate. Check controller batteries where applicable.
  3. From ground level, look for loose leaves, snow or objects obstructing the outdoor unit. Clear only material you can safely reach without touching the fan, fins or internal parts; follow the unit's instructions.

Stop: danger

  • Smoke, burning or electrical damage: stop using the system. Isolate it only if you can do so safely. If there is a fire, leave the property and call 999.
  • Severe cold affecting someone: confusion, slurred speech or slow breathing can indicate hypothermia. Call 999 if you suspect it. Follow NHS hypothermia advice for safe steps while waiting.
  • Internal repairs: do not remove covers or work on refrigerant, wiring or safety devices. Do not climb to reach a high-mounted unit.

Defrosting or a fault?

During cold weather, an air source unit may need to defrost. A temporary interruption does not by itself establish a fault. The normal sequence and duration depend on the equipment: use its operating instructions rather than a generic countdown.

Contact the installer if heat does not return as expected, the home keeps getting colder or icing persists. Do not diagnose a refrigerant leak from ice alone. Several faults can produce similar symptoms, and an engineer needs to inspect the system.

For background on normal defrosting and fault reporting, read the operating section of this publicly funded heat pump guide. Its operating principles are useful, but its Scottish programme context does not determine English tenancy rights.

Safe checks, then stop

If the screen is blank, check whether other parts of the home have power. Look at the consumer unit only if it is dry and safe to approach. Do not repeatedly reset a protective device or restart the heat pump: follow the user instructions and arrange help if it trips.

For an air-to-air system, clean an accessible user-serviceable filter only as instructed, with the equipment safely switched off. Do not remove a casing to reach it. Avoid changing installer menus, heating-water pressure or cylinder safety settings while trying to clear an unrelated fault.

What not to do

  • Chipping ice from the outdoor coil or pouring hot water over the unit.
  • Covering an operating heat pump or obstructing its airflow.
  • Repeatedly raising the room setting to force a faulty system to heat.
  • Using a barbecue, camping stove or outdoor generator indoors for emergency warmth.

Arrange the right repair

Contact the original installer or warranty contact first where appropriate. Give the model reference, fault message, symptoms and any recent power interruption. Ask whether the system should remain on while you wait and whether an installed backup heater can be used.

Use an engineer competent in your equipment and refrigerant. Where F gas is involved, qualifications are legally required: consult GOV.UK's qualification guidance and ask the contractor to confirm qualifications covering the proposed work. Not every heat pump uses F gas.

For future servicing, follow the equipment's maintenance and warranty requirements. Do not assume a universal service interval applies to every English installation.

Keep warm and report rented-home repairs

Move vulnerable household members somewhere warm if necessary. If using a portable electric heater, plug it directly into a suitable wall socket, keep it clear of furnishings and do not leave it unattended or running while asleep. Use Electrical Safety First's heater guidance to check your temporary arrangement.

In England, landlords are responsible for repairing heating and hot-water installations. Report the fault promptly, explain who is at risk and ask about temporary heating. Keep written records and continue paying rent. Follow GOV.UK's repairs guidance if repairs are not arranged; use the council finder to contact environmental health or private rented housing. Tenancy procedures differ elsewhere in the UK.

Good to know

  • A radiator feeling cooler than a boiler-heated radiator does not alone prove a heat pump fault; check whether the room reaches its intended temperature.
  • Keep the handover instructions, service records and repair contact details together.
  • Ask the engineer to explain the cause and any changes made, rather than simply clearing the fault message.

Illustrative example: Sam notices that the house is cooling and the controller shows a fault. He photographs the display and checks the heating schedule. He leaves the covers closed and tells his landlord that heating has stopped. The landlord arranges an engineer and discusses safe temporary heating while the fault is investigated.

A made-up story, for illustration.

Bobby

Read more guides

Bobby publishes free practical guides written for England: English laws, numbers and organizations. In England, Bobby answers your questions; it does not put you in touch with professionals.

All guides: England

Sources, verification, confidence

Verified on 7 November 2026, for England. Confidence: high for English landlord repair responsibilities, F-gas qualifications and emergency safety; medium for general operating checks, which must follow the particular equipment's instructions. No universal defrost duration, clearance distance or servicing interval is asserted.

Related guides

Also worth reading