US versionOther versions: France (in French) · Belgium (in French) · Switzerland (in French) · England
Clothes dryers
How much electricity does a clothes dryer use?
Your model, your rate and your laundry habits determine the cost.
The answer in 2 lines. There is no single electricity-use figure for every US dryer. Identify whether yours is a conventional electric, heat pump or gas model, then look for model-specific energy data. Keep annual estimates separate from measurements for a load. Multiply estimated kWh by your applicable electricity rate in dollars per kWh. Your load size, remaining moisture, settings and maintenance affect the result. A gas dryer's electricity use does not include the cost of its gas.
Gather the information
- Find the exact model number and identify the fuel and dryer type from the manual or accessible product label. Do not move a heavy appliance to reach a hidden label.
- Check whether the available energy figure is annual electricity use, measured load use or an efficiency rating. Keep its unit and assumptions with it.
- Find the applicable usage rate on your electricity bill or rate schedule, and record your normal drying frequency. Ask your utility to explain any unclear usage charges.
Stop: danger
- Electrical measurement: do not improvise adapters or connect a dryer to an ordinary household plug-in energy meter. Measurement equipment must be suitable for the appliance and circuit.
- Unusual heat or burning odor: stop using the dryer and have it checked. Energy monitoring is not a reason to keep a potentially unsafe appliance running.
Find data for the appliance you actually own
Start with the product documentation. A figure for another dryer, even one with similar capacity, may be a poor match. If you cannot find consumption data, acknowledge that gap rather than assigning the appliance a supposed average.
The federal ENERGY STAR clothes-dryer page explains dryer technologies and Combined Energy Factor, or CEF. Read its efficiency explanation before comparing models: a higher CEF indicates greater efficiency, but CEF is not the electricity consumed by a load. If you follow its product-comparison links, match the exact model and read the units and test assumptions.
An annual test estimate helps compare products under common assumptions. It is not a promise about your household's bill. Do not divide it by an invented number of loads to produce a supposedly precise cycle figure.
What not to do
- Treating an annual kWh estimate as the electricity consumed by each load.
- Multiplying maximum nameplate wattage by the entire cycle time and presenting the result as measured consumption.
- Using a national average electricity price instead of your applicable rate.
- Assuming a longer program necessarily uses more energy than a shorter one.
- Attributing the entire household bill increase to the dryer without checking other usage and rate changes.
Turn energy use into a useful budget
For a measured or supported load estimate: load kWh × applicable $/kWh = estimated electricity cost for that load. For a period of use, add the supported load estimates or multiply a representative estimate by your recorded drying frequency. Label the result as an estimate.
For time-of-use service, use the rate applicable while the machine operates. A cycle spanning different rate periods needs a more detailed calculation. Include applicable usage-based delivery charges and taxes when estimating the additional bill cost; do not assign the whole fixed monthly account charge to laundry.
For a gas dryer, keep the electricity and gas calculations separate, using each bill's units and rate. Comparing only electric kWh with an all-electric model leaves out part of the gas dryer's operating cost.
If you need an actual measurement, ask a qualified electrician about equipment appropriate for your circuit. Whole-home consumption can provide context, but other appliances running at the same time complicate attribution.
Reduce avoidable drying
Follow garment instructions, use an appropriate washer spin setting and separate items with different drying needs. Choose a suitable automatic moisture-sensing setting when available, rather than repeatedly adding timed heat after clothing is dry.
Use the Department of Energy's 2022 Energy Saver guide by finding its Clothes Dryers section. It explains moisture sensors and lower-heat drying. These are general operating tips, not a current price quotation or a guaranteed saving for your model.
Maintain the filter and other user-serviceable parts according to the manual. For a vented dryer, unusually long drying deserves an airflow check. Air drying can avoid running the dryer when the garment and your available drying space allow it.
Good to know
- Electricity rates and rate structures vary by utility and location. There is no nationwide household dryer tariff.
- Heat pump and conventional electric dryers use different drying systems. Compare supported model data alongside capacity and installation requirements.
- No universal annual dollar cost, savings percentage or payback period is asserted here.
Illustrative example: Casey finds an annual energy estimate and initially assumes it applies to every load. After checking the documentation, Casey keeps that figure for model comparisons and records actual drying frequency separately. Casey then uses the household's applicable electricity rate for a budget, clearly marking it as an estimate rather than a measurement.
A made-up story, for illustration.
Read more guides
Bobby publishes free practical guides written for the United States: American laws, numbers and organizations. In the United States, Bobby answers your questions; it does not put you in touch with professionals.
All guides: United StatesSources, verification, confidence
Verified on November 14, 2026, for the United States. Confidence: high for the distinction between energy use, efficiency ratings and electricity cost; medium for any household estimate without suitable measurement. The dated operating guide cited below was published in 2022; no national price or universal consumption figure is used.