All guides

England versionOther versions: France (in French) · Belgium (in French) · Switzerland (in French) · United States

Tumble dryers

How much electricity does a tumble dryer use?

The useful figure is energy per load, matched to your own electricity rate.

The answer in 2 lines. Start with the energy information for your exact dryer, then check what period its kWh figure covers. England is within the Great Britain energy-labelling system, which is undergoing a transition in 2026. Do not assume that every dryer already carries the same label. Multiply the estimated electricity per cycle by your own electricity unit rate to estimate the cost, then multiply by your drying frequency. There is no single annual cost that fits every household.

The first steps

  1. Find the energy label or product information for your exact model. Read the units beside the consumption figure.
  2. Find your electricity unit rate on your current bill or tariff details, including any applicable tax.
  3. Count the loads you actually dry and note the programmes you normally use.

Stop: danger

  • Do not trade safety for a cheaper tariff: avoid running the dryer while you are asleep or away.
  • A hot or scorched plug, socket or cable: stop using the appliance and arrange a safety assessment before continuing.

Which label applies in England?

Great Britain and Northern Ireland have different implementation arrangements. Do not transfer a Northern Ireland or EU label-change date directly to an appliance sold in England.

Read the tumble-dryer announcement on GOV.UK's energy-labelling guidance, then open the linked tumble-dryer guidance if you need to identify the format. For a rescaled label, the 2026 Great Britain regulations' label schedules specify weighted consumption per 100 drying cycles. Older labels use annual consumption. Compare the printed units before calculating.

Calculate a useful estimate

  • Consumption per 100 cycles: divide the displayed kWh by 100 to obtain the standardised average per cycle.
  • Consumption per cycle: multiply that figure by your unit rate in £ per kWh.
  • Your annual use: multiply the estimated cost per cycle by the number of cycles you expect to run.
  • An annual label figure: do not treat it as the energy used by each load. Look for programme-level information in the product information or manual.

If your tariff is quoted in pence, keep the calculation in pence until converting the result to pounds. With different rates at different times, use the rate during drying; a cycle crossing tariff periods needs a split calculation or a clearly labelled approximation.

What not to do

  • Comparing an annual figure directly with consumption per 100 cycles.
  • Treating the appliance's maximum wattage as constant consumption throughout the programme.
  • Using the household's monthly payment as the electricity unit price.
  • Assuming a shorter programme always uses less electricity.
  • Adding the whole household standing charge to the cost of drying.

Use your tariff, not a headline bill

The unit rate prices electricity used; the standing charge is a separate daily cost. Your monthly payment can cover estimated use across the whole home and adjustments to the account balance.

Use Ofgem's current rates page to understand the distinction: enter your postcode to identify the region, then select the table for your payment method and the applicable period. For a personal dryer estimate, use the actual rate in your contract. The price cap does not make every household's tariff identical.

Reduce unnecessary drying

Avoid drying beyond the level you need. Follow programme load limits, keep the filters maintained and investigate unusually long drying rather than adding repeated cycles. Heat-pump dryers generally use less electricity than conventional electric condenser or vented models, but compare the actual model information before replacing a working appliance.

For further guidance, open the tumble-dryer section of Energy Saving Trust's appliance advice. It explains sensor drying and alternatives. Air drying can avoid dryer electricity use; when drying indoors, ventilate to manage the moisture released.

Good to know

  • Label consumption is measured under standard conditions; your loads, starting moisture and chosen settings affect actual use.
  • The same calculation works in Wales and Scotland, which share the Great Britain labelling framework. Northern Ireland has different implementation arrangements.
  • New requirements for products entering the market do not, by themselves, require you to discard an existing dryer.

Illustrative example: Daniel starts calculating from a large kWh number on an older label, then notices that it is annual consumption. He finds programme consumption for the exact model instead, checks his current electricity rate and counts his usual loads. He records the result as a budget estimate rather than a measured appliance bill.

A made-up story, for illustration.

Bobby

Read more guides

Bobby publishes free practical guides written for England: English laws, numbers and organizations. In England, Bobby answers your questions; it does not put you in touch with professionals.

All guides: England

Sources, verification, confidence

Verified on 14 November 2026, for England. Confidence: high for the calculation method and the distinction between Great Britain and Northern Ireland; medium for predicting an individual household's consumption. The 2026 labelling transition means the actual label format must be checked. No universal annual cost is quoted.

Related guides

Also worth reading