All guides

England versionOther versions: France (in French) · Belgium (in French) · Switzerland (in French) · United States

Air conditioning and heat pumps

Air-to-air or air-to-water heat pump: what's the difference?

Decide what you need to heat before choosing the equipment.

The answer in 2 lines. Both types collect heat from outdoor air. Air-to-air systems deliver warm air through indoor units and can also offer cooling; they usually need a separate arrangement for hot water. Air-to-water systems heat water for radiators or underfloor heating and can serve a hot water cylinder. In England, choose around your whole home's needs, available space and running costs. Check the current grant conditions before accepting a quote: support now includes eligible air-to-air systems.

The first steps

  1. Describe your current heating. Note whether you have water-filled radiators, underfloor heating or direct electric heaters, and how your taps get hot water.
  2. Write down your priorities. Whole-home heating, summer cooling and hot water are separate requirements.
  3. Request a home assessment. Ask for room-by-room heating needs, proposed equipment locations and a complete installation specification.

Stop: danger

  • Leave installation to qualified professionals. Refrigerant connections and permanent electrical work are not suitable household trial-and-error jobs.
  • Do not remove your existing heating until the replacement design, permissions and any grant arrangements are confirmed.

Compare what each system provides

QuestionAir-to-airAir-to-water
How does heat reach rooms?Indoor units deliver warm air.Heated water supplies radiators or underfloor heating.
What about hot taps?Usually needs a separate hot water system.Can heat a suitable hot water cylinder.
Summer cooling?Available on reversible equipment.Do not assume it is included; ask for a specific cooling design.
What changes indoors?Indoor units and connecting routes.Possibly radiators, pipework, controls and cylinder arrangements.

The government's heat pump explanation describes heat transfer and home suitability. Read it before discussing the proposed design with an installer.

Will your existing home work with it?

For air-to-water, ask which radiators and pipes can stay and which need changing. A proposal should explain how each room will remain comfortable, rather than promise that every existing radiator will be suitable. Check where a cylinder would go if you currently have a combi boiler.

For air-to-air, ask how heat will reach bedrooms and other rooms when doors are closed. Discuss indoor fan noise, draughts, unit appearance and access for cleaning. Include the separate hot water arrangement in the comparison.

Cheltenham Borough Council's heat pump guidance explains potential changes to radiators and pipework. Use those points as questions for your assessment, wherever you live in England.

What not to do

  • Comparing a quote for one room with a quote for whole-home heating and hot water.
  • Treating an advertised maximum efficiency as a guaranteed saving on your bill.
  • Assuming every reversible air conditioner qualifies for a heating grant.
  • Accepting a quote without checking outdoor noise, access and maintenance.

What help is listed for England in 2026?

The Boiler Upgrade Scheme grant page lists £7,500 for eligible air-to-water installations and £2,500 for eligible air-to-air installations. It also lists an additional £1,500 for qualifying air-to-water or ground-source replacements of oil or LPG heating at properties without a mains gas connection, until March 2027.

Read the official eligibility page against your property and existing heating. Ask the installer to identify the applicable category and show the grant separately from your contribution. Do not assume that adding cooling while keeping your existing heating qualifies. Wales shares this scheme; Scotland and Northern Ireland have different support arrangements.

Compare complete quotes

Ask each installer to show equipment, labour, electrical changes, removal of old equipment, controls, commissioning and aftercare. Request estimated annual electricity use with the assumptions behind it, including hot water and any supplementary heating.

Planning is another check. Use GOV.UK's planning guidance to contact the relevant planning authority about the proposed outdoor unit. Ask the installer to explain which permissions and building requirements apply before work starts.

Good to know

  • Both options need electricity. Running costs depend on the building, system design, controls and tariff.
  • Ask for a demonstration of the controls and written maintenance instructions at handover.
  • Improving shading and ventilation may reduce your need for summer cooling; include those measures in your decision.

Illustrative example: Priya in Nottingham compares replacing her boiler with adding warm-air units. The first proposal includes radiator changes and a cylinder; the second needs a separate hot water solution. She asks for both quotes to cover the same rooms and household needs before comparing the final cost.

A made-up story, for illustration.

Bobby

Read more guides

Bobby publishes free practical guides written for England: English laws, numbers and organizations. In England, Bobby answers your questions; it does not put you in touch with professionals.

All guides: England

Sources, verification, confidence

Verified on 7 November 2026, for England. Confidence: high for the operating principles and grant amounts listed in official 2026 guidance; medium for suitability, running costs and individual grant eligibility, which require a property assessment. No universal installation price or guaranteed saving is given.

Related guides

Also worth reading