US versionOther versions: France (in French) · Belgium (in French) · Switzerland (in French) · England
Clothes dryers
Dryer making noise: what to check and when to stop
Describe the sound before deciding which part is broken.
The answer in 2 lines. A dryer sound alone cannot identify a failed belt, roller, bearing or motor. Stop the cycle, wait for the drum to stop and disconnect power safely before accessible checks. Look for loose objects, hard clothing accessories and contact with surrounding furniture. A new scraping sound, worsening vibration or recurring damage deserves professional inspection. Do not remove panels, spray lubricant inside or keep running the appliance to prove which part is at fault.
Start with accessible checks
- Stop the program with its controls and wait for the drum to stop. Let the machine cool and unplug it if the plug is safely accessible; do not pull a heavy dryer forward to reach it.
- Inspect the laundry and visible drum. Remove only loose objects that are easy to reach, and set aside items with hard accessories that may be striking the drum.
- Remove objects resting on the dryer and observe any contact with nearby furniture. Check the manual's installation guidance without tilting the appliance or disturbing a stacked installation.
Stop: danger
- Burning odor, sparks, smoke or a damaged cord or outlet: stop use. Disconnect power only if safe. If there is fire or spreading smoke, leave and call 911 from outside.
- Gas odor from a gas dryer or nearby piping: leave without operating switches or unplugging equipment. Contact your gas utility's emergency service from outside.
- Persistent scraping, grinding or worsening movement: leave the dryer off and arrange professional inspection. Do not restart it just to record the sound.
Describe what changed
Write down whether the noise began at startup, during tumbling or near the end. Say whether it appeared suddenly, has existed since installation or has gradually become louder. Note whether drying performance changed at the same time.
A rattle may coincide with a loose object or clothing hardware; vibration may be transmitted through surrounding surfaces. Those are observations to investigate, not confirmed diagnoses. A familiar airflow sound and a new metallic scraping sound deserve different responses, but neither identifies an internal component by itself.
Use your exact model's manual to check described operating sounds and installation requirements. Do not assume a recording of a similar-looking appliance applies to yours. If the manual does not explain a new persistent noise, ask for an assessment.
What not to do
- Reaching behind the drum or pushing a screwdriver through an opening to retrieve a trapped object.
- Spraying lubricant inside the machine or bypassing a switch or protective device.
- Buying a replacement part solely because someone else's appliance made a similar sound.
- Moving a gas dryer and straining its gas connection, or changing stacked-unit brackets yourself.
- Running repeated test loads while scraping, unusual heat or worsening vibration continues.
Check maintenance without dismantling the dryer
Inspect the removable lint filter as directed in the manual. Do not operate the dryer without it. If the appliance also takes longer to dry, request an airflow and exhaust check instead of assuming that the noise is the only problem.
Use the U.S. Fire Administration dryer safety checklist to review filter cleaning, vent care and professional servicing. Follow the maintenance instructions for your dryer type: a ventless appliance does not have the same exhaust arrangement as a vented model.
Check the CPSC recall search using the appliance name and exact model information. Open any matching notice and compare the affected model and serial details before following its remedy. A similar product name is not enough, and no matching recall does not establish that your machine is safe.
Prepare a repair request in the US
Gather the purchase receipt, model information, warranty documents and your observations. Record the checks already completed. Ask the repair provider to explain the proposed diagnosis and provide written terms covering the visit, diagnostic charge, labor, parts and any repair warranty before you authorize paid work.
Read the FTC warranty guidance alongside your warranty: check what is covered, what costs remain yours and how to request service. Implied-warranty rights and permitted exclusions depend on state law. Do not assume a nationwide free-repair period.
For a landlord-provided dryer, report the problem in writing and request instructions before arranging work yourself. Responsibility depends on the lease, the cause and applicable state or local rules.
Good to know
- There is no universal sound-to-part diagnosis or household noise threshold used in this guide.
- An appliance noisy since installation and one that suddenly becomes noisy need different histories reported to the technician.
- No universal repair price or part lifespan is quoted. Ask for a diagnosis and a written estimate for your appliance.
Illustrative example: Morgan hears a tapping sound and finds a loose object after stopping, cooling and unplugging the dryer. Morgan removes it without dismantling anything. Later, a different scraping sound appears. Morgan leaves the appliance off and reports the new symptom rather than assuming another loose object is responsible.
A made-up story, for illustration.
Read more guides
Bobby publishes free practical guides written for the United States: American laws, numbers and organizations. In the United States, Bobby answers your questions; it does not put you in touch with professionals.
All guides: United StatesSources, verification, confidence
Verified on November 14, 2026, for the United States. Confidence: high for dryer maintenance precautions, recall checking and general warranty guidance; medium for troubleshooting without an appliance inspection. No mechanical cause is confirmed from sound alone. Warranty and rental responsibilities depend on the documents and applicable state law.