England versionOther versions: France (in French) · Belgium (in French) · Switzerland (in French)
Air conditioning and heat pumps
Outdoor air conditioning unit noisy or vibrating: what should you do?
Find the source of the noise before buying something to hide it.
The answer in 2 lines. Fans and compressors make some noise, but a new rattle, scraping sound or vibration through a wall deserves investigation. Observe from a safe, accessible position without removing covers or touching moving parts. Ask the installer to check the equipment, its supports and any contact with the building. An acoustic enclosure may not solve vibration transmitted through the structure and could obstruct essential airflow.
Your first steps
- Note what changed. Record the operating mode, circumstances and rooms affected, including whether the sound began after installation or servicing.
- Look from a safe position. Check whether a loose object nearby appears to touch the unit, without reaching through the grille.
- Contact the installer or maintenance engineer. Describe the sound and request an assessment of operation, supports and connections.
Stop: danger
- Pronounced movement or severe scraping: stop the appliance using its normal controls and arrange an inspection before restarting.
- Inaccessible outdoor unit: stay on the ground. Do not lean over a balcony or improvise a platform.
- Moving parts and electrical components: keep hands and tools out of the grille and leave panels closed.
Airborne sound or vibration through the building?
A rushing sound may be most obvious near the fan. A hum inside a room may involve vibration passing through brackets, pipework or another contact with the structure. The place where you hear it loudest does not necessarily identify the defective component.
Compare what you hear indoors and outside without touching the equipment. Note whether the sound follows starting, stopping or a change of operating mode. A short recording can illustrate the complaint, but it cannot establish the cause or demonstrate compliance with a legal noise requirement. Ask the engineer to distinguish the noise source from its route into the building.
What you can do without dismantling anything
Keep the surrounding area clear. Move an ordinary loose object only if it is safely accessible and you can remove it without touching the unit, cables, pipework or grille. Follow the appliance instructions for any user maintenance and shutdown procedure.
Prepare a simple log containing the date, operating mode, sound description and affected room. Mention any reduced heating or cooling, warning message or recent work. Ask the engineer to check support condition, unwanted contact and moving components as appropriate, then provide a written explanation of the cause and proposed correction. These are inspection questions, not a diagnosis you need to make yourself.
What not to do
- Tightening brackets at random or inserting wedges under the unit.
- Pressing pipework against a wall to stop it moving.
- Buying replacement mounts before the transmission route has been investigated.
- Building a close-fitting enclosure that obstructs airflow or maintenance access.
- Repeatedly running a unit that is moving abnormally or scraping severely.
Ask for a correction that matches the cause
An airborne-noise screen and vibration isolation address different problems. Before agreeing to either, ask what the inspection found, how the proposed work addresses it and how the result will be checked. If relocation is proposed, ask about permissions, pipework, access and the effect on neighbouring homes.
For refrigerant work, use the official F-gas qualifications guidance: select the stationary equipment section and request suitable evidence from the contractor. A noise complaint alone does not justify opening the refrigerant circuit.
If the installation is recent, report the symptoms to the installer in writing before commissioning alterations elsewhere.
England: repairs and noise complaints
For a paid repair, consult Citizens Advice's home-work guidance and use its sections on quotes and written contracts before accepting the proposal. If you rent, send the observations to your landlord or managing agent before arranging changes.
If noise affects neighbours or comes from someone else's equipment, use the official council noise-reporting service. Enter the affected property's postcode, follow the council link and describe the source, timing and impact. Follow any instructions for keeping a diary.
The official explanation of noise nuisance investigations shows how complaints are assessed. A phone recording or an equipment label does not settle that assessment. Planning and reporting arrangements differ elsewhere; the reporting service provides separate routes for Scotland and Northern Ireland.
Good to know
- A product's declared noise figure is not a measurement of what reaches a particular bedroom.
- There is no single figure in this guide that can declare every outdoor unit acceptable in every setting.
- No official national price for correcting outdoor-unit vibration has been confirmed. Request a quote based on the identified cause.
Illustrative example: Nadia hears a hum in her bedroom whenever the new outdoor unit runs. Outside, the airflow sounds unremarkable. She records when the hum appears and sends the installer a written description. She asks for the supports and building contacts to be examined before agreeing to an enclosure.
A made-up story, for illustration.
Read more guides
Bobby publishes free practical guides written for England: English laws, numbers and organizations. In England, Bobby answers your questions; it does not put you in touch with professionals.
All guides: EnglandSources, verification, confidence
Verified on 7 November 2026, for England. Confidence: high for the official complaint route and professional F-gas requirements; medium for possible noise and vibration transmission routes, which need an on-site assessment. No universal sound threshold or official national repair budget is asserted.