All guides

England versionOther versions: France (in French) · Belgium (in French) · Switzerland (in French) · United States

Heating, boilers and hot water

Boiler making noises: what should you do?

Describe the sound before deciding what needs fixing.

The answer in 2 lines. A new whistle, rumble or banging sound deserves attention, but the noise alone cannot identify a faulty part. Listen from a safe position and note whether it happens during heating, hot-water use or shutdown. Do not remove the casing or change engineer settings. Arrange an inspection if the noise is new, persistent or getting worse. For a gas boiler, use a suitably qualified Gas Safe registered engineer. Stop using an appliance that appears unsafe and follow emergency advice if you smell gas or suspect carbon monoxide.

The first steps

  1. Listen without touching hot surfaces: is the sound strongest at the boiler, a radiator, a valve or nearby pipework?
  2. Note the trigger: heating starting, a hot tap opening, ordinary running or the appliance stopping.
  3. Record the sound from a safe position and photograph any visible error message. Do not restart the boiler repeatedly to reproduce it.

Stop: danger

  • Violent banging or a sudden noise with a leak: stop using the boiler; switch it off through its normal controls only if safe. Arrange an inspection before restarting.
  • Gas smell or suspected gas escape: leave and call 0800 111 999 from outside.
  • Suspected carbon monoxide exposure: go outside and seek medical advice. Call NHS 111 for suspected symptoms; call 999 for breathing difficulty, collapse or sudden confusion. Do not re-enter until advised.

Check where you hear it most clearly

Sound travels along pipes and through cupboards, so a noise beside the boiler may come from elsewhere. Tell the engineer where it is loudest and whether the radiators still heat normally. Avoid putting your ear against the appliance or reaching behind it.

Describe what you actually hear: a steady hum, intermittent whistle, gurgle or sharp bang. Mention whether this is a change from the usual sound. A recording provides context; it cannot establish that the boiler is safe.

Useful observations for the engineer

  • Noise during heating only: identify any radiators that are also noisy or heating unevenly.
  • Noise when a hot tap opens: explain whether the water temperature changes at the same time.
  • Noise after recent work: describe the work and when you first noticed the change.
  • A visible warning: copy the exact display message without clearing it through repeated resets.

These are ways to organise an inspection, rather than a list of confirmed faults. Do not order a replacement pump, valve or heat exchanger based on a sound heard online.

What not to do

  • Removing the boiler casing, adjusting combustion settings or entering installer menus.
  • Blocking ventilation or building a makeshift enclosure to muffle the noise.
  • Adding cleaning chemicals or commissioning a system flush solely because someone has described the sound as kettling.
  • Bleeding every radiator or repeatedly topping up pressure without first understanding the problem.

Arrange the right inspection

For gas work, use the Gas Safe Register search: enter your postcode to find registered businesses, then check that the visiting engineer is qualified for your appliance and fuel. Check their identification card when they arrive. Registration is not a substitute for agreeing the work and price.

Ask what the call-out and diagnosis include, whether parts are extra and whether a further visit would be charged. Explain that you need a fault investigated: a routine service may have a different scope. Request a written explanation of the cause and proposed repair before authorising additional work.

If you rent in England

Report the noise to your landlord or managing agent in writing, especially if heating or hot water is affected. Include the recording and any warning message. The GOV.UK repairs guide explains landlord responsibilities; read the heating, hot-water and gas-installation sections before discussing arrangements.

Ask who will arrange access and the inspection. Explain any immediate safety concern by telephone as well as in writing. Tenancy procedures differ in Wales, Scotland and Northern Ireland; this guide covers England.

Good to know

  • Carbon monoxide cannot be identified by a boiler's sound or smell. Read the NHS guidance at https://www.nhs.uk/conditions/carbon-monoxide-poisoning/ and use its urgent-action sections if exposure is suspected.
  • There is no universal noise threshold in this guide that declares a boiler safe or faulty. The cause requires an appropriate inspection.

Illustrative example: Aisha in Leeds hears a whistle when the heating starts. From a safe distance, she notices it is clearest beside a radiator valve. She sends her landlord a recording and explains that the boiler display shows no warning. The engineer checks the heating system before recommending any parts.

A made-up story, for illustration.

Bobby

Read more guides

Bobby publishes free practical guides written for England: English laws, numbers and organizations. In England, Bobby answers your questions; it does not put you in touch with professionals.

All guides: England

Sources, verification, confidence

Verified on 7 November 2026, for England. Confidence: high for emergency advice and landlord responsibilities; medium for practical observations. A noise cannot confirm a defective component remotely.

Related guides

Also worth reading