All guides

England versionOther versions: France (in French) · Belgium (in French) · Switzerland (in French) · United States

Air conditioning and heat pumps

What size air conditioner does your room need?

Start with your room, rather than the biggest number on the box.

The answer in 2 lines. Choose air conditioning by its cooling capacity, rather than its electrical input alone. Floor area is a starting point, but sunny glazing, roof exposure, ceiling height, insulation, occupants and equipment all matter. For a fixed system, request a room-by-room assessment and a written explanation of the proposed capacity. For a portable unit, check the stated room conditions and the exhaust arrangement. This guide does not give a universal watts-per-square-metre rule: the official sources reviewed do not establish one for every English home.

The first steps

  1. Measure the room's length, width and ceiling height. Describe connected spaces and whether doors normally remain open.
  2. Record sunny windows, roof exposure, shading, occupants and heat-producing equipment. Explain when the room becomes uncomfortable.
  3. Find the cooling-capacity figure in the product information. Ask for clarification if the listing shows only electrical consumption or an unexplained room coverage claim.

Stop: danger

  • Electrical warning signs: do not test a proposed appliance on a scorched, loose or overheating socket. Stop using the socket and have a qualified electrician assess it.
  • Refrigerant connections: sizing a system does not make it suitable for DIY installation. Leave work on the refrigerant circuit to an appropriately qualified professional.

Understand the figures you are comparing

Cooling capacity describes the rate at which an appliance can remove heat. Electrical input describes the power it uses. They answer different questions, so ask which figure a quote or advertisement is showing.

Product information may use kW for capacity and kWh for energy consumption. Keep the units attached when taking notes. Do not compare a seasonal consumption figure for a split with an hourly figure for a portable unit as though the test conditions were identical. Ask for the same basis of comparison and keep a copy of the product information.

Why floor area is not enough

The official air-conditioning inspection guide describes cooling demand as dependent on the building fabric, location, orientation, activities and occupants. Read its section on system size to understand why a simple room-area estimate has limits. Its inspection screening examples should not be treated as a domestic installation calculator.

Give the assessor a useful description: a shaded bedroom used at night differs from an upstairs study with afternoon sun and equipment running. Explain proposed changes too, such as external shading or converting an adjoining space. Otherwise the recommendation may be based on a different room from the one you intend to use.

What not to do

  • Buying the largest available unit without asking why that capacity suits the room.
  • Copying a capacity from another home with different glazing, exposure or occupancy.
  • Assuming a portable appliance can cool an entire floor through open doors.
  • Treating an approximate online estimate as the final design for a fixed installation.

What to ask for in a fixed-system quote

Request the proposed indoor and outdoor equipment, cooling capacity for each served room, placement and drainage arrangements. Ask what conditions the calculation assumes and how the equipment responds when the room needs less cooling. If several indoor units share outdoor equipment, ask what happens when they operate together.

If heating is part of the plan, ask for a separate explanation of winter performance. A cooling recommendation alone does not demonstrate that the system will meet your heating needs. The proposed electrical supply and any associated work should also appear in the quote.

Make a portable-unit decision carefully

Check the intended room conditions, exhaust route, window arrangement and operating limits before ordering. Ask for written clarification where a coverage claim is unclear. A capacity figure cannot compensate for an unsuitable installation arrangement.

For the labelling framework, use GOV.UK's energy-labelling guidance to identify the information to request. For fixed equipment, consult the official F-gas qualifications guidance and ask the installer to explain the qualifications relevant to the work.

Good to know

  • Ask for the assumptions behind a recommendation, rather than accepting a capacity figure without explanation.
  • Planning approval and equipment sizing are separate checks. England's planning arrangements should not be assumed to apply in Wales, Scotland or Northern Ireland.
  • No universal domestic sizing multiplier or guaranteed running cost has been confirmed for this guide.

Illustrative example: a homeowner in Sheffield receives a quote based only on the floor area of a loft study. She sends photographs of the roof windows, describes afternoon sun and explains that she works there with equipment running. She asks for the recommendation to be reviewed and the revised assumptions recorded before accepting.

A made-up story, for illustration.

Bobby

Read more guides

Bobby publishes free practical guides written for England: English laws, numbers and organizations. In England, Bobby answers your questions; it does not put you in touch with professionals.

All guides: England

Sources, verification, confidence

Verified on 7 November 2026, for England. Confidence: high for the distinction between capacity and energy information and the factors identified in official cooling-load guidance; medium for equipment selection without an assessment. A universal domestic watts-per-square-metre rule and a room-size capacity table have not been confirmed and are therefore omitted.

Related guides

Also worth reading