All guides

US versionOther versions: France (in French) · Belgium (in French) · Switzerland (in French) · England

Clothes dryers

Dryer running but not heating: what to check

A turning drum tells you the dryer runs. It doesn't tell you why the heat is missing.

The answer in 2 lines. Check whether the selected cycle is supposed to heat, using the instructions for your exact model. Stop and unplug the dryer before user maintenance, provided the plug is safely accessible. Clean the lint filter and inspect accessible venting without moving gas connections or opening panels. Damp laundry alone does not establish a heating failure. If a heated cycle still appears cold, arrange professional diagnosis rather than ordering a heating element.

Start with these checks

  1. Write down the cycle and temperature options. Check their description in the model's own instructions, including any unheated setting or cool-down stage.
  2. Stop the dryer before maintenance. Unplug it only if the plug and surrounding area are dry, undamaged and safely accessible.
  3. Record what actually happened: drum turning, clothes damp, unusual message, or apparent lack of warmth. Include whether the problem began after installation or a move.

Stop: danger

  • Smoke or fire: get everyone out, stay outside and call 911. Don't open the dryer to investigate.
  • Burning smell, sparks or a damaged plug: stop using the dryer and arrange inspection. Don't keep running cycles to confirm the fault.
  • Gas odor: leave without operating switches or unplugging anything. From a safe location outside, call 911 or your gas utility's emergency number. Follow the PHMSA gas emergency instructions.

Confirm the symptom before naming a failed part

A wet load and a cold dryer are different observations. Record which one you have. If you checked only after the cycle ended, say that: it does not establish what happened throughout the cycle. Don't reach inside a running dryer or defeat its door switch to investigate.

Find the full model reference on an accessible label or purchase document. Use the matching instructions to interpret the cycle, options and any displayed code. If those instructions don't provide a user test for heating, don't invent a temperature threshold or test duration.

Prepare a short account: which cycle you selected, when you noticed the problem, whether it has happened before and what maintenance you completed. These details help a technician distinguish a setting issue, an installation problem and an internal fault.

What not to do

  • Buying a heating element because another household's dryer had the same symptom.
  • Removing panels, testing live terminals or bypassing a thermal safety device.
  • Running the dryer with its exhaust disconnected as a household troubleshooting experiment.
  • Repeatedly resetting a breaker that trips when the dryer operates.

Check maintenance, then identify the technology

Clean the lint filter and inspect the visible exhaust connection for crushing or damage. If the duct or outdoor outlet is inaccessible, arrange professional inspection. The U.S. Fire Administration dryer checklist shows the filter and venting points to review; use it alongside your appliance instructions.

Heat pump dryers normally use lower heat than standard electric dryers. They also collect moisture that must be drained or emptied as their instructions require. The ENERGY STAR heat pump dryer guide explains these differences. Read its drainage and maintenance sections before treating gentler heat as a failure.

Arrange a repair in the United States

Gather your receipt and written warranty before authorizing paid work. Use the FTC warranty guide to check coverage, exclusions and the required claim procedure. Warranty terms and state-law rights differ; don't assume there is a universal repair deadline.

Check the CPSC recall search: search for the dryer, then compare the complete model information with any notice and follow its remedy instructions if it matches.

For paid service, request written diagnostic and travel charges, what remains payable if you decline repairs, and an estimate before parts are installed. Tell the technician whether the dryer is gas, conventional electric or heat pump. If you rent and the dryer belongs to the landlord, report the fault in writing before commissioning work yourself.

Good to know

  • A turning drum does not identify the heating fault. The appliance and its electrical supply may both need professional assessment.
  • No universal operating temperature, test duration or repair price is established here. Use the exact instructions and a written estimate.
  • Keep the dryer out of use when accessible checks leave an unexplained malfunction. A technician can decide which further tests are appropriate.

Illustrative example: Jordan notices damp towels after a cycle. Jordan records the selected setting, checks the model instructions and cleans the accessible lint filter with the dryer disconnected. The problem remains. Instead of ordering an element, Jordan sends the technician the model reference, cycle details and observations, and asks for the diagnostic fee in writing.

A made-up story, for illustration.

Bobby

Read more guides

Bobby publishes free practical guides written for the United States: American laws, numbers and organizations. In the United States, Bobby answers your questions; it does not put you in touch with professionals.

All guides: United States

Sources, verification, confidence

Verified on November 14, 2026, for the United States. Confidence: high for fire precautions, maintenance principles and warranty guidance; medium for troubleshooting without the exact model. The failed component cannot be identified from this symptom alone.

Related guides

Also worth reading