All guides

England versionOther versions: France (in French) · Belgium (in French) · Switzerland (in French) · United States

Tumble dryers

Tumble dryer won't start: what should you check?

Start by noticing whether the controls are completely dark.

The answer in 2 lines. Distinguish a dryer with no lights from one whose display works but whose programme will not start. Check the accessible plug and socket switch only if they are dry and undamaged. Then follow the model's instructions for the door, programme controls and any warning indicators. Do not force the latch, bypass a safety switch or repeatedly reset a tripping circuit. If the checks do not help, record the symptoms and arrange a diagnosis.

Start with these observations

  1. Look at the controls: completely dark, lit normally or showing a message? Photograph any warning before changing settings.
  2. Check that laundry is not trapped in the door and that it closes normally. Do not slam it or hold the latch shut with an object.
  3. Find the full model reference and its manual. Use the instructions for that appliance rather than a similar-looking control panel.

Stop: danger

  • Damaged cable, scorched socket, burning smell or electrical tripping: stop testing and keep the dryer out of use. Do not keep resetting the protection.
  • Humming without normal drum movement: stop further start attempts and report the sound to a qualified repairer.
  • Smoke or fire: get out, stay out and call 999. Do not open the appliance to investigate.

If the controls are completely dark

Look at the accessible connection without dismantling anything. If the area is dry and there are no signs of damage, check whether the plug is properly inserted and the socket switch is on. Do not drag a heavy appliance out or reach into a cramped gap just to complete this check.

Note whether other equipment has also lost power, using what you already know. A wider supply problem and an appliance fault need different attention. Avoid extension leads, exposed wiring checks or plug repairs as a way of forcing a result. If the socket itself seems faulty, have a registered electrician assess it rather than treating it as a dryer component problem.

If the display works but drying will not start

With the appliance stopped, check the door for trapped clothing. Look up the exact start procedure and any delayed-start or control-lock setting in the manual. Button combinations differ: pressing everything in turn can obscure the original symptom without resolving it.

Follow the instructions for any filter or water-container warning. Some appliances discharge condensed water through a hose, so do not assume that every model has the same emptying procedure. If the load exceeds the programme's stated capacity, remove excess laundry. Only make a further attempt if the manual permits it and no warning signs are present. Persistent refusal to start needs diagnosis.

What not to do

  • Wedging the door switch, taping the latch or otherwise bypassing a safeguard.
  • Opening the casing to test the motor or electronic board.
  • Repeatedly resetting a circuit breaker or replacing fuses without finding the cause.
  • Buying an internal part solely because the controls light up but the drum does not move.

Check official notices and document the fault

Use the GOV.UK product recalls and alerts guidance to reach the relevant tumble dryer notices. Compare the complete model details and follow the instructions for any matching product. A safety warning takes priority over routine troubleshooting.

Prepare a short repair note: whether the display lights up, the exact message, what happens when you press start, any sound, and the checks already completed. Include whether the failure began after installation, a move or previously normal use. You do not need to identify the failed part yourself.

In England: arrange the right repair route

Before booking paid work, check purchase evidence and read the repairs and warranties sections of GOV.UK's faulty goods guidance. Contact the seller in writing if the appliance may qualify for a statutory remedy. Use Citizens Advice's faulty goods guide to assess your circumstances if the seller disputes responsibility.

For private repair work, ask for the total diagnostic and call-out charges, the proposed work and the amount payable if you refuse the repair. Keep the written terms and subsequent invoice. For an electrical installation concern, open GOV.UK's competent person guidance and follow its electrical register link to check an electrician's registration. That registration concerns installation work; separately confirm experience with appliance repairs.

Good to know

  • There is no model-independent reset sequence in this guide. Use only the procedure specified for your dryer.
  • Review the filter-cleaning instructions in the manual. The general fire precautions are also explained in the linked sources.
  • This guide addresses England. Consumer dispute procedures and building regulations should be checked separately in Wales, Scotland and Northern Ireland.

Illustrative example: Priya's dryer lights up but will not run. She checks for clothing caught in the door, then reads the start and lock instructions. The refusal continues. She photographs the display and writes to the seller with her purchase evidence, model reference and a clear account of what happens when she presses start.

A made-up story, for illustration.

Bobby

Read more guides

Bobby publishes free practical guides written for England: English laws, numbers and organizations. In England, Bobby answers your questions; it does not put you in touch with professionals.

All guides: England

Sources, verification, confidence

Verified on 14 November 2026, for England. Confidence: high for electrical warning signs, recall checking and consumer routes; medium for model-dependent starting checks. The responsible component, reset procedure and repair cost require the exact model and an assessment.

Related guides

Also worth reading