All guides

England versionOther versions: France (in French) · Belgium (in French) · Switzerland (in French) · United States

Swimming pools

How much does it cost to run a swimming pool each year?

The figure that matters is the one for your own pool, and you can work it out.

The answer in 2 lines. There is no single reliable yearly figure for running a home swimming pool in England, and no recent official average covers every cost. The number that counts is your own. Add up the electricity your pump and other equipment use, the water you add, the chemicals you actually use up, replacement parts and any servicing visits. Keep heating separate, because it can cost more than everything else put together. For electricity, the Ofgem price cap for 1 October to 31 December 2026 averages 26.32p per kWh for Direct Debit customers. For water, use the rate per cubic metre on your own water bill.

The first 3 steps

  1. Gather your bills and receipts for one full season, from opening the pool to closing it down for winter.
  2. Separate running costs from one-off purchases. A new pump or liner is not a normal yearly expense.
  3. List what uses energy and water: filtration, heating, other equipment (lights, cleaner, cover motor) and top-ups.

The right budget is the one for your pool

A heated pool used from spring to autumn and an unheated pool used for a few summer weeks have very different costs. Size alone is not enough to compare budgets. You also need the volume of water, the equipment, how long the pool is in use and who does the maintenance.

Decide first what you want to measure. Running costs are what it takes to use and look after the pool. A total budget can also include a big repair or a replacement part.

Keep these apart. You will then see whether your spending rose because of normal use or because of one exceptional purchase. To plan next season, start from your real receipts, then add any changes you expect: heating added, a longer season or a servicing contract.

CostWhat to includeHow to work it out
ElectricityFiltration pump, dosing, robot cleaner, lightsEnergy used by the equipment × the unit rate on your tariff
HeatingHeat pump, heater or other energy used to warm the waterMeasured use, or an estimate clearly labelled as such
WaterFilling and any top-upsVolume used × your water company's rate, if you are on a meter
Chemicals and consumablesTreatment, test kits, filter media or cartridgesWhat you actually used, not everything you bought
ServicingVisits, opening, closing, call-out chargesInvoices or detailed written quotes
One-off costsRepairs and replacement equipmentKept separate from running costs

How to estimate electricity and water

Electricity: for equipment running at a steady power, multiply its power in kilowatts (kW) by the hours it runs. That gives kilowatt-hours (kWh). Multiply by the unit rate on your bill. Worked example: a pump drawing 0.75 kW for 8 hours uses 6 kWh. At the October to December 2026 average cap rate of 26.32p, that comes to about £1.58 a day. Check your own pump's input power and your own tariff before using this method.

Water: if you have a water meter, you pay for the volume you use. Your bill shows the charge per cubic metre (1 cubic metre = 1,000 litres), and sewerage charges may also depend on the volume. If you are not on a meter, your bill does not change with how much you use. Read your meter before and after filling the pool, and avoid other heavy water use while you do it.

  • Use the electrical input power on the pump's rating plate or manual, not its flow rate.
  • Use the real running time, including weeks when the pool is kept clean but nobody swims.
  • For variable-speed pumps or heat pumps, the power changes as they run. A smart meter in-home display, read with other appliances switched off, gives a better picture than a calculation.
  • Note down every assumption. A rough estimate you understand is more useful than a total when you no longer know where it came from.

What not to do

  • Using an old average from a website as if it were the price of your own pool.
  • Putting your whole summer electricity bill down to the pool.
  • Counting every chemical you bought as if it had all been used up this season.
  • Forgetting heating, filter cartridges or call-out charges.
  • Cutting the water treatment to hit a budget: badly treated water is a health risk.

Good to know

  • The Ofgem price cap changes every three months. The 26.32p per kWh average applies from 1 October to 31 December 2026; check Ofgem's regional table for your area.
  • In a drought, your water company can bring in a temporary use ban (hosepipe ban). It can cover filling or maintaining a domestic swimming or paddling pool, so plan top-ups early in a dry summer.
  • Water is charged differently in Scotland and Northern Ireland: check with Scottish Water or NI Water.

Sam, who has an unheated pool in the garden of their house in Kent, thinks this year cost far more than last. Going through the receipts, they separate a new pump, a bulk order of chemicals that is half unused, and the normal running costs. The real running cost is close to last year's. Sam now has a clear basis for next season and for comparing servicing quotes.

A made-up story, for illustration.

How to compare a servicing quote

Ask exactly what the price includes: number of visits, chemicals, water testing, cleaning, opening, winter closing and travel. Ask which supplies are extra and how additional work is charged. A vague package price is hard to compare.

Compare quotes for the same work. If you do part of the maintenance yourself, say which jobs you want to keep. Ask how unexpected repairs will be priced and agreed with you before they are done, and get the answer in writing.

In your area

Your water company sets the price per cubic metre and announces any hosepipe ban. Its name is on your water bill. If you do not have a bill yet, use the Water UK customers page: type your postcode into the "Find your supplier" tool. Then check that company's website for its current charges and any restrictions. If your postcode is not recognised, ask a neighbour or check a recent bill for the address.

For electricity, open Ofgem's price cap rates by region and find your region in the table. If you are on a fixed tariff, use the rate on your own bill.

The figures available, and their limits

  • 26.32p per kWh, 1 October to 31 December 2026: Ofgem average capped electricity unit rate for Direct Debit customers, with an average daily standing charge of 54.83p.
  • No recent official figure was found for the cost of chemicals for a home pool in England.
  • No recent official yearly total covering every running cost of a home pool was found.

Your budget will therefore combine real bills with estimates that you mark clearly as estimates. At the end of the season, replace the estimates with real figures. You will end up with a personal budget you can use again, which is more useful than any national average.

Bobby

Read more guides

Bobby publishes free practical guides written for England: English laws, numbers and organizations. In England, Bobby answers your questions; it does not put you in touch with professionals.

All guides: England

Sources, verification, confidence

Verified on 11 November 2026, for England. Confidence: high for the Ofgem price cap figures for October to December 2026 and the energy calculation method; high for temporary use bans covering domestic pools; low for any general yearly budget, because no recent official figure covers every cost of running a home pool. This guide describes common cases, not a quote.

Related guides

Also worth reading