All guides

England versionOther version: France (in French)

Cleaning

How to remove limescale from a shower screen

White marks on the glass? It's the water, not you.

The answer in 2 lines. Spray warm white vinegar or a citric acid solution onto the glass, leave it to work without letting it dry, then rub gently with a soft sponge, rinse well and dry with a microfibre cloth. Rinse aluminium frames and the shower tray quickly, and check first if your screen has a special coating or your tray is natural stone. Never use bleach or another cleaner straight after a descaler without rinsing. To stop the marks coming back, run a squeegee over the glass after every shower. Limescale comes from hard water: much of England has it, and your water company can tell you how hard yours is.

The first 3 steps

  1. Spray the screen while it is dry: warm white vinegar or citric acid dissolved in water.
  2. Leave it to work, spraying again if it starts to dry: dried vinegar leaves marks.
  3. Rub gently, rinse and dry with a soft sponge, then plenty of water and a microfibre cloth.

Stop: danger

  • Never mix a descaler with bleach, or use one after the other without rinsing in between: acids and bleach together give off toxic gas.
  • Fumes, coughing or stinging eyes while cleaning: leave the room, open the window and get into fresh air. Call 111 for advice, or 999 if someone is struggling to breathe or collapses.
  • Product in the eyes or swallowed: do not make the person sick. Call 111, or 999 if they are seriously unwell, and keep the bottle to show the staff.

Depending on the state of the screen

What you seeWhat to do
Light hazeDiluted vinegar, a short wait, then a squeegee.
Clear white marksWarm vinegar or citric acid, a longer wait, soft sponge.
Thick, old depositsSeveral rounds. On vertical glass, kitchen roll soaked in vinegar and pressed onto the screen keeps the product in place.
Screen with an anti-limescale coatingOnly the products the manufacturer allows.

Frames, seals and the tray

  • Aluminium frames do not like acid left on them for long: rinse quickly.
  • Black marks on silicone are usually mould, not limescale: a mould product or a new seal (see our guide on replacing silicone).
  • Rinse the bottom of the screen well so no acid is left on the tray. Natural stone such as marble or limestone can be damaged by acids: check how your tray should be cleaned before you start.

What not to do

  • Scourers, scrapers or scouring powder on the glass: they scratch it and its coating.
  • Letting vinegar dry on the screen: it leaves streaks.
  • Using bleach just after a descaler without rinsing thoroughly in between.
  • Decanting products into unlabelled bottles: keep each in its original container.

What you can do yourself, and where to stop

  • Descaling with vinegar or citric acid: yes, it is safe for the glass itself.
  • Shop-bought descalers: follow the label, with the window open, and never with bleach.
  • Where to stop: a screen that is scratched or permanently cloudy will not look new again. A cracked or loose glass panel needs replacing by a professional: do not keep using the shower with it.

In your area: how hard is your water?

Hardness comes from calcium and magnesium picked up from the local rock, so it varies across England, sometimes street by street. The Drinking Water Inspectorate (DWI) uses these bands, in milligrams of calcium carbonate per litre: soft up to 100, slightly hard 100 to 150, moderately hard 150 to 200, hard 200 to 300, very hard above 300.

  • Find your supplier: enter your postcode on the Water UK supplier finder, or look at your water bill.
  • Ask for your hardness: the DWI says your water company can give you an accurate figure. Many have a postcode checker on their website.
  • Thinking of a water softener? Read the DWI advice on filters and softeners first: keep an unsoftened tap in the kitchen for drinking and cooking, and have it fitted by a qualified plumber.

Good to know

  • Vinegar works better warm: a few seconds in the microwave in a suitable container, without letting it boil.
  • A squeegee after every shower is the single most effective habit. Opening the window or running the extractor fan helps the glass dry quickly.
  • Hard water is safe to drink: UK drinking water rules set no standard for hardness, according to the DWI. Its effects are limescale and less lather.

In Cambridge, Priya found her shower screen turning white every week. She descaled it once with warm vinegar, kept it damp while it worked, rinsed the tray straight away and dried the glass. She now keeps a squeegee in the shower. A month later the screen is still clear.

A made-up story, for illustration.

Bobby

Read more guides

Bobby publishes free practical guides written for England: English laws, numbers and organizations. In England, Bobby answers your questions; it does not put you in touch with professionals.

All guides: England

Sources, verification, confidence

Verified on 11 November 2026, for England. Confidence: high for the hardness bands and softener advice (Drinking Water Inspectorate) and for the danger of mixing products; medium for the cleaning method, which is common household practice: no official waiting time or dilution is confirmed, and your screen's instructions come first.

Related guides

Also worth reading